When choosing oil-based colored pencils for coloring in fine details, the core is far less important than the tip. Prismacolor offers three grades of colored pencil tips that will allow you to create beautiful coloring jobs.
Some pencils come with lead holders that are designed to resist breaking, so if you’re worried about sharpening your pencils, you might want to buy a Prismacolor Pencil Sharpeners.
While they differ in housing design and sharpening mechanism, they all share the same weakness: They have small flat blades that grind away at the wood-cased leads until they reach an internal wall that prevents further grinding.
Learn how to open a Prismacolor pencil sharpener in this article. Let’s get started.
What are Prismacolor Sharpeners?
What’s the difference between Prismacolor Sharpeners and traditional Sharpening Machines? Prismacolor Sharpeners are made for Prismacolor Premier and Preferred pencils.
Prismacolor Premier and Preferred pencils are great for coloring, sketching, and tracing. They come in a wide range of colors to provide rich color output and smooth layering.
Step by Step Guide on How to Open Prismacolor Pencil Sharpener
A step-by-step guide to opening Prismacolor pencil sharpeners is shown. They usually have an air-tight lid to prevent moisture from inside from leaking out. But, with time, and depending on temperature changes, they become less air-tight.
Air-tightening devices usually last for years and have very little to no effect on their quality, so don’t worry about losing quality when they start having a different appearance than when they were new. You can check if they’re working properly by using them.
There are many different ways to sharpen your pencils. Here is how to open a Prismacolor pencil sharpener using an easy step by step guide:
Step 1: Get Familiarized With the Tool Before Use!
The first thing you need to do when using a new sharpener is to check out what material it’s made of.
Once you have a good understanding of what you need, go ahead and get a pair of pliers.
Step 2: Find the Right Location Where to Press!
In order to properly press, find the perfect location where to push down on the sharpener. The blades are the main parts of the sharpener that should be opened for you to take out whatever is inside without having to break them. The good thing about this essential step is that finding the correct spot isn’t hard at all since you need to apply pressure on the part that has been lifted so far (the left side if we’re looking from an angle).
Step 3: Put Everything Back Together!
Pull the shavings out! You’ll need to protect the sharpener from being scratched with a cloth or something similar, or else it might not come out.
Step 4: Take Out the Shavings!
Put everything away and take out the shavings. The last thing you want to do is put everything back in its place and see if it still works properly.
Precautions While Opening a Prismacolor Pencil Sharpener:
You need to wear gloves while opening a Prismacolor pencil sharpener. The temperature generated from this experiment is less than 100 degrees Celsius.
Wear protective goggles or glasses if applicable. Do not wear contact lenses while doing this experiment because they can break due to the intense heat. Goggles or glasses also allow you to see better and avoid potential eye damage from heat.
Make sure you wear gloves or use tongs to protect yourself while using the pencil sharpener during this experiment. External sources of extreme heat can damage the sharpener.
Do not use a sharpener if it has been in use. To be on the safe side, always keep an eye on your surroundings, especially if you have children or pets in the house.
Make sure they do not come near the Prismacolor Pencil Sharpener while it’s hot, as their bodies could touch some portions and get burned instantly without them even knowing what happened until later.
How to Clean A Prismacolor Pencil Sharpener?
Prismacolor Pencil Sharpeners are made of rubber and metal. Therefore, they need to be cleaned, especially if multiple people use them.
Don’t let the pencil sharpener turn your pencil tips into a paintbrush. Remove the top of the sharpener to expose the grinding mechanism. This mechanism will work, but if there are any sharpening bits of lead inside, the sharpener will ruin your pencils. Empty out the sharpener, removing all sharpening bits of lead.
Remove any excess cosmetic powder that may have gotten on the razor blade from inside the razor and then rinse the blade well with hot, soapy water. Let the razor sit until it cools to room temperature, or longer if desired, then wipe off the blade. Replace the blade in the razor handle.
Take your sharpener completely apart and wash all of it with warm water, soap, and an old toothbrush. Don’t forget to clean around the blade area too! Let your sharpener air-dry completely before you reassemble it.
Oil-based paints or colored pencils can get into the blades of your sharpener, which will eventually stop working. Make sure to clean your sharpener after each class.
Use this pen sharpener to sharpen your Prismacolor Pencils. Clean it carefully so it doesn’t wear out more quickly than expected. To clean an electric sharpener, brush it with a toothbrush dipped in soapy water, then wrap lens paper around it and let it dry. It’s a great disposable tool for this job.
How to Sharpen a Prisma color Pencil
1. First, find a sharpener that is specifically made for Prisma color pencils. These sharpeners will have a larger hole that can accommodate the thicker lead of the Prisma pencils.
2. Insert the pencil into the sharpener and turn slowly to avoid breaking the lead.
3. Keep twisting until the lead is fully sharpened.
4. If needed, use a small piece of sandpaper or fine-grit sanding block to gently smooth out any rough edges on the tip of the pencil. Be sure to only do this sparingly and carefully, so as not to damage the lead or weaken its point.
5. Enjoy your perfectly sharpened Prisma color pencil and use it to create vibrant, colorful drawings and sketches!
Frequently Asked Questions (FAQs)
Can You Sharpen Prisma color Pencils with a Normal Sharpener?
Yes, you can sharpen Prisma color pencils with a normal sharpener. However, you need to be careful not to over-sharpen the pencils, as this can damage the lead. The best way to sharpen Prisma color pencils is to use a sharpening blade that is specifically designed for use with these pencils.
Are Prisma color Pencils worth It?
Prisma color pencils are a great choice for artists and hobbyists who want high-quality, vibrant colors in their drawings or other artwork. These pencils are known for their rich pigmentation and smooth application, making them a popular choice among artists looking to achieve bold, vivid colors. While Prisma color pencils can be more expensive than some other brands, their superior quality makes them worth the investment for many artists.
Is Faber Castell Better than Prisma color?
As different artists may prefer the colors and performance of one brand over another. That said, many artists consider Faber Castell to be a higher-quality pencil brand than Prisma color, thanks to its smooth application, rich pigmentation, and wide range of colors. If you are looking for a premium pencil brand that can help you achieve beautiful, vivid colors in your artwork, Faber Castell may be the right choice for you.
What Kind of Sharpener Is Best for Colored Pencils?
If you enjoy working with colored pencils, then it’s important to have the right tools for the job. One key tool that is often overlooked is a sharpener. There are many different kinds of sharpeners available on the market today, but which one is best suited for colored pencils?
One option is an electric sharpener. These are designed specifically for colored pencils, and they are able to provide a nice, clean point that can help you achieve precise lines and details in your work. However, these can be quite expensive and require regular maintenance, such as cleaning out the shavings frequently.
Another option is a manual sharpener. These are often less expensive than electric sharpeners and will also allow you to create a nice, sharp point. However, it can be difficult to get a precise point with these types of sharpeners, especially if you have very soft or waxy colored pencils.
Ultimately, the best kind of sharpener for colored pencils will depend on your personal preferences, as well as the type of colored pencils you are using. Consider trying out different options to see which one works best for your needs. With the right sharpener, you can create stunning artwork with your colored pencils that is sure to impress!
Final Thoughts
I hope that the information in this article has given you all the information about how to open your Prismacolor pencil sharpener. Thank you very much and have a nice day!